Datoptic ARC-1680 Series Bedienungsanleitung PDF herunterladen (Seite 97)

DRIVER INSTALLATION

system installations. Determine the correct kernel version and

identify which diskette images contain drivers for that kernel. If the

driver le ends in .img, create the appropriate driver diskette using

“dd” utility. The following steps are required to create the driver

diskettes:

1. The computer system BIOS must be set to boot-up from the

CD-ROM.

2. Insert the SATA controller driver CD disc into the CD-ROM

drive.

3. The system will boot-up from CD-ROM Drive.

Note:

It will take about 5 minutes to boot up the Knoppix

GNU/Linux, Live Linux CD.

4. To create the driver diskette, for example: making the Cen-

tOS 5 driver diskette.

4a. Execute xterm by clicking the XTerm icon on left-bottom

toolbar.

4b. Change the path to the specic driver image.

cd /cdrom/PACKAGES/Linux/DRIVER/CentOS_5

4c. Dump the driver image into oppy diskette using "dd" util

-ity, Command format: dd if=<image le> of=

dd if=driver.img of=/dev/fd0

4d. When the operation is complete, the following messages are

shown.

2880+0 records in

2880+0 records out

1474560 bytes (1.5 MB) copied, 97.5903 seconds, 15.1

kB/s

The driver diskette is made now. Proceed to the following

instruction for installation procedures.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 183 184

Keine Kommentare

Datoptic ARC-1680 Series Bedienungsanleitung Seite 97