Datoptic ARC-1680 Series Bedienungsanleitung PDF herunterladen (Seite 42)

BIOS CONFIGURATION

3. McBIOS RAID Manager

The system mainboard BIOS automatically congures the following

SAS RAID controller parameters at power-up:

• I/O Port Address

• Interrupt Channel (IRQ)

• Adapter ROM Base Address

Use McBIOS RAID manager to further congure the SAS RAID control-

ler to suit your server hardware and operating system.

3.1 Starting the McBIOS RAID Manager

This section explains how to use the McBIOS RAID manager to

congure your RAID system. The McBIOS RAID manager is de-

signed to be user-friendly. It is a menu-driven program, residing

in the rmware, which allows you to scroll through various menus

and sub-menus and select among the predetermined conguration

options.

When starting a system with a SAS RAID controller installed, it will

display the following message on the monitor during the start-up

sequence (after the system BIOS startup screen but before the

operating system boots):

The McBIOS RAID manager message remains on your screen for

about nine seconds, giving you time to start the congurarion

menu by pressing Tab or F6. If you do not wish to enter congu-

ration menu, press ESC to skip conguration immediately. When

activated, the McBIOS RAID manager window appears showing a

selection dialog box listing the SAS RAID controllers that are in-

stalled in the system.

The legend at the bottom of the screen shows you what keys are

enabled for the windows.

Bus/Dev/Fun= 1/0/0, I/0-Port=28000000h, IRQ=9, BIOS=CB00 : 0h

No BIOS disk found. RAID controller BIOS not installed!

Press <Tab/F6> to enter SETUP menu. 9 second(s) left <ESC to Skip>..

ARC-1680 PCIEx4 RAID Controller - DRAM: 256(MB) / #Channels: 16

BIOS: V1.17b / Date: 2006-8-07 - F/W: V1.42 / Date: 2007-3-1

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 183 184

Keine Kommentare

Datoptic ARC-1680 Series Bedienungsanleitung Seite 42